Step 1: Install Corel Draw 12, X4, X8 or similar version.
Step 2: Install CorelLaser
Open CorelLaser. You can use this template to start with, it has one engraving layer and one cutting layer.
Most important setting is the mainboard, you may need to change this later if your machine operates very slow (a first sign of wrong mainboard selected)
You can find information about wich board you have on the controller board in your machine.
Next setting is to check your hardware device ID, you can find this on the controller board, se image below
You are now ready to start your first test with the machine
Start with the “rectangle tool” in corel, make a box with the size of your choise, i made a 54x40mm box.
Select the box as shown in the picture, and in the top menu you see a line width set to “hairline”.
Change this to 0.001 and hit enter.
You are now ready for your first cut test.
Click OK on the data setting, we did this in a earlier step.
Make sure the settings are still there.
To explain some of the settings
Company and model is just the data about your machine.
Rotate: if you need to rotate or flip your design for mirrored cut/engravings.
Style: Cutting, engraving and marking. For this test we choose CUTTING.
Inside first is a good option if you make parts, the machine will cut the inner parts first and then the outer, preventing the part to fall down without the inner holes are cut.
Speed: I have a 3mm acrylic piece in my machine, you may have to test the speed and the power on your machine when testing your cut.
I would suggest 12mA power and 10mm/sec to start with.
Method: If you have combined engraving and cut in the same file, you can choose here.
In the template before, we split engraving and cut in two different layers, this will help you to run the engraving first, and cut later.
Pixel: set this to 1 step, and Repeat to 1 times
You are now ready to hit STARTING
More tips and tricks
Test similar design to learn how power and speed relates on your machine, this is different on most K40 and you cannot use the same settings someone else has. You need to find your optimal combo.